MISOLIMA eJames GPS III
   
Complete package
    This package offer included eJames GPS III from MISOLIMA, GPS antenna and software to test and setup the SiRF Star III GPS receiver. eJames has USB connections.
Embedded system
with integrated OS
and DOLLx8 software
   
 
MISOLIMA eJames GPS III MCX/SMA
SiRF STAR III GPS RECEIVER FOR USB

High performance acquisition
 Fast 20 channels -139dbm as overage. EGNOS (Europe) or WAAS (USA) for better positioning accuracy.

Communication port
 USB 2.0

Communication protocol
NMEA v. 3.01 or later.

Antenna connectors
eJames GPS III MCX (Order no.: M2030100-0X1)
eJames GPS III SMA (Order no.: M2030100-0X2)
PIN
PORT 1 Connector Pins
PIN
1
 Vin (Out)   GND
2
3
 GPS STATUS   RX GPS
4
5
 TX GPS   RX DOLLx8
6
7
 TX DOLLx8   IO0
8
9
 +5Vin (USB)   GND
10
11
 SWITCH #1   ADC #1
12
13
 ON/OFF Power   ANT Vin
14
eJames GPS III PRO
James GPS III comes in 4 colours; Black, Purple, Red and Blue.
Black Order no.: M2030100-01X
Purple Order no.: M2030100-02X
Red Order no.: M2030100-03X
Blue Order no.: M2030100-04X

MISOLIMA eJames GPS IV has I/O port with pin connections as shown in the table above.

This package consists of SiRF Star III GPS receiver, mini GPS antenna with 3m cable, USB cable and software for setup and testing of the GPS device. Even though this packages works on NMEA protocol, it can also be used with SiRF Binary protocol if needed.

The provided GPS antenna has magnetic footing so it can be fastened to any magnetic metal surface or it could also be taped with double sided tape to any surface.

 o eCharlie U2R
 o eThomas REL22
 o eOscar KeyPad
 o eAlbert DOLLx8
 o eBonnie 15-368 AVL
 o eClyde 15-368 GSM
 o ePAT MCU
 o eGSM Q4 1800
 o eLeon Horizon60
 o eMichael MiRAS
 o eJames GPS III
 
 o eMessanger 220
 o eBalletPC
 o eGraFIKO 640 TFT
 

 Company: MISOLIMA
 Product ID: 002A10XXX
 DOLLx8 Ver.: 3.0r18
 HWUART Baudrate: 38400
 Device: eJames GPS IV
 Hardware Ver.: 1.0r01
 Software Ver.: 1.0r01
 Software Date: 28 JAN 2011
 MCU Speed: 18.432 MHz

The eJames GPS III PRO was designed to be used in the more professional markets where more than just GPS data is needed and where the GPS is connected to a computer system for full control.

If eJames GPS III PRO is connected to a PC, then any DOLLx8 devices can be connected to the GPS, no matter if its eAlbert DOLLx8 for hardware I/O and sensor control, or eOscar KeyPad for key input or eMessanger for depicting GPS data etc. The eJames GPS III PRO system is made for system integration and if just a GPS receiver is needed then the eJames GPS III will do the job.
Features eJames GPS III PRO
· Interface to DOLLx8 network protocol
· 2x10 pin I/O port with 2mm spacing
· 1-bit I/O
· 1 Switch input line
· 1 ADC 10-bit resolution
· GPS Out via DOLLx8 RX-TX port
· Antenna voltage in if other than 3V needed
· GPS LED status out
· Built-in backup battery for GPS
· Built-in DC to DC switching power supply
· ON/OFF line, active Open
· LED indication for RX, TX and GPS status.
· Panel mounting as option

 

Features and Specifications of eJames GPS III
Order Number: M2030100-0X1 with MCX antenna connector
  M2030100-0X2 with SMA antenna connector
Response time: 1Hz (1 times per second)
GPS receiver: 20 Channel GPS/Galileo L1, C/A code
Tracking sensitivity: -152dBm (average) or better
Acquisition sensitivity: -139dBm (average) or better
TTFF
(Time to First Fix):		 Cold Start: 50s (average) / 60s (95% possibility)
Warm Start: 35s (average) / 40s (95% possibility)
Hot Start: 2s (minimum) / 6s (95% possibility)
Positioning accuracy: Standard Positioning Service (SPS), EGNOS (Europe) or WAAS (USA)
2DRMS: Approx. 1-5m
Time accuracy: 1es or less precision
Update time: 1Hz (1 time per second)
NMEA output protocol: V.3.01
Baud rate: 1200-56000 bps (8-N-1)
Datum: WGS-84
Type: GGA, GSA, GSV, RMC, VTG, ZDA, GLL
GPS Status: GPS Status on front pannel and port connector:
GPS Reset : By software
Communication: USB
Connector type : USB Type A
Power consumption: 39mA (average)
Power supply: 5 VDC (5-28V for eJames GPS III PRO)
Antenna type: Active GPS antenna 3.3V
Internal battery: 3V battery
Dimensions: 37mm x 52mm x 21mm (top case)
Operating temperature: -40°C ~ +85°C
Storage temperature: -55°C ~ +100°C
Front and backplate colours: Black, Purple, Red and Blue

How does DOLLx8 work?

DOLLx8 stands for Digital One Line Link and it is well known that if your devices can do more things, you can also do more things with it. Check out how the easy to use and easy to program or control capabilities of DOLLx8 Certified devices can revolutionize the way you control your electrical devices at home, office, workplace or in vehicles. As embedded system DOLLx8 Certified devices can be controlled via RS-232, USB or GSM with easy to use text messages.

All you need to get started is one or more DOLLx8 Certified devices that links to each other with standard PC network cable with RJ-45 connectors. All is made easy because DOLLx8 Certified devices are able to connect, discover and communicate with each other over a DOLLx8 Certified network – that again might connect to one or more PC's for I/O control. In fact more than one PC can share the control of the DOLLx8 Certified devices that might also carry Username and Password functions for security reasons.

My page history: Contact | GSM | HireUs | MISGPS32 | MissionStatement | Clear History
 
MISOLIMA 
www.misolima.com and its brand MISOLIMA© is licensed 
Copyright® 2000/12 - All rights reserved. 
Privacy Policy | Return Policy | Terms and Conditions | Warranty |
Note: All the dates (DD.MM.YY) and times are given in Far East Time (UTC+07:00)